How to Clean a Shower Head: Easy Steps to Eliminate Mineral Deposits

January 13, 2023

Written by: Florie Malapit

0  comments

  • Home
  • Blog
  • Bathroom
  • How to Clean a Shower Head: Easy Steps to Eliminate Mineral Deposits

How to Clean a Shower Head: Easy Steps to Eliminate Mineral Deposits

Cleaning your shower head is a great way to save money and keep your bathroom looking nice. Shower heads are notorious for collecting grime, and if you don't clean your shower head regularly, you could be wasting water and money while also spreading bacteria around your home. This blog post will outline the easy steps to clean your grimy shower head. Let's get started!

It's no secret that the shower head is one of the essential parts of your bathroom. It's more than just a place to get clean. It's where you get ready for the day, where you let your hair wet and style it after a shower, and it's where you spend time relaxing at night before bed.

But what happens when your shower head gets grimy? It doesn't look quite as lovely, and it doesn't feel quite as refreshing.

It's time to clean that thing up. This article will teach you how to clean a shower head in 7 easy steps to enjoy your morning ritual again.

How to clean a showerhead to eliminate mineral deposits

What You'll Need

  • Old toothbrush
  • Wrench
  • Kitchen towel
  • Bucket
  • Warm water
  • Distilled white vinegar
  • Dish soap
  • Baking soda
  • All-purpose bathroom cleaner
  • Bottlebrush
  • Clean cloth
  • Toothpick or safety pin

Instructions

1. Inspect your shower head

Examine your shower head before moving on to anything else. Verify the presence of mineral deposits and the degree of crusting. Sometimes, all it takes to remove anything is a little scraping.

Open the faucet. Light cleaning is sufficient if the spray holes or nozzle produce water ideally. You may need to remove the shower head to thoroughly clean if the water flow is restricted or the buildup appears significant.

You can contact a house cleaning service in Melbourne to clean your shower head if the mess is more extensive than you believe you can handle or if you'd prefer to leave it to the experts. If not, get your cleaning products and check to see if anyone has to shower.

2. Remove the shower head

Remove the shower head

Depending on the model of your shower head, you may need to either twist the shower head off or loosen the nut holding it to the shower arm. Switch to a wrench from pliers. To protect your fittings from scratches, cushion your tool with a kitchen towel.

After unscrewing it, you can see a tiny rubber washer inside the hose connector. Remember that your shower will probably leak water from this connection without it, so keep it safe.

3. Scrub the shower head nozzles

Be mindful of the flexible rubber nozzles most modern shower heads use to deliver water into the stall. Mineral deposits build up in those nozzles over time, comprising the fixture and degrading its effectiveness.

To remove any residues you can see on the holes, spray some all-purpose bathroom cleaner on the nozzles and scrub them with a toothbrush or tiny brush. Refrain from cleaning the soft rubber too hard. Also, remove harsh chemical cleaning products from shower heads because they might stain them and harm the nozzles.

4. Rinse the shower head

Rinse the shower head to clear away debris

Give the showerhead a powerful blast of water by holding it upside down beneath a faucet. Turn the shower head around to spray each area evenly. It will assist in clearing away debris from the aperture that connects to the shower arm. You can scrape the showerhead with an old toothbrush and white vinegar to remove debris if there are still mineral deposits.

5. Disassemble and clean your showerhead

Carefully remove all the washers, filters, and water restrictors from your shower head. After that, use the toothbrush to clean the shower head's interior. Use a toothpick or safety pin to prod them out for further deposits.

You can handle the flexible plastic nubbins on your showerhead with your fingertips to loosen mineral deposits if it has those features. Use a bottle brush dipped in water and dish soap to access the pipe.

6. Soak the showerhead parts in white vinegar and baking soda

Soak the shower head in white vinegar and baking soda

Completely let the shower head soak in a solution of an equal amount of warm water and white vinegar to remove any lingering limescale buildup and eradicate any mold or bacteria that may have begun to form.

Before soaking, mix a couple of tablespoons of baking soda and white vinegar for more cleaning power. Clogged passages will be helped to clear by the natural abrasive. Let the shower head soak overnight if the fixture is clad in brass, gold, or nickel. If so, after 30 minutes, remove the shower head parts from the white vinegar solution.

If the fixture is constructed of metal, it can be boiled in a pot of distilled white vinegar on the stove for 15 minutes. After giving your fittings a good bath, rinse and dry them with a clean cloth.

7. Reassemble the showerhead

First, wrap new plumbing tape around the shower arm's threads to create a tight seal. Using a wrench, reattach the shower head to the shower arm. While you work, cover the fixture's finish with soft cloths or towels. Rerun the hot shower to ensure the spray is functioning correctly and test it. To make a shiny finish, polish and wipe.

Reassemble the shower head and you're good to go for the morning's first shower

You’re Good to Go for the Morning’s First Shower!

So there you have it, a simple step-by-step guide to cleaning your shower head. The next time you're ready to go for your morning's first hot bath, you can breathe easy knowing that the water from your shower head is clean and safe.

With so many easy steps, getting rid of those mineral deposits and ensuring your shower is clean has never been easier. Now that you know how to clean a shower head, remember to share this post with your friends. They'll thank you for it.

And if you're looking for the best way to clean your bathroom, look no further. We've got you covered with our ultimate bathroom cleaning guide— all the tips and tricks you need to make your bathroom sparkle like never before!


FAQs: How to Clean a Shower head

How often do you need to clean a showerhead?

Your shower head should receive a thorough cleaning at least once every month to eliminate hard water stains and mineral buildup like limescale. In addition to reducing water pressure and slowing water flow, hard water deposits can be a haven for germs that risk human health.

Why do you need to clean a shower head?

The first reason in cleaning a showerhead is that the buildup of gunk and grime on your shower head can cause the water pressure to decrease over time. The second reason is that soap scum can build up inside your shower head, causing it to clog up and work effectively. Another reason is that if you don't clean your shower regularly, it could start leaking water onto the floor when you turn it on, leading to all sorts of problems down the road.

What can't you use to clean a shower head?

Don’t use bleach, as it can be caustic and may degrade shower heads. It may also damage other fittings inside your bathroom.

Don’t use a hard bristled brush, especially if your shower fittings are made from chrome and other protected metals. You’ll risk scratching or scuffing the surface. An old toothbrush or other soft-bristled tools are better.

remove the dishwasher racks

Tags

Bathroom cleaning, DIY, Expert Guide, Green Cleaning, How to, shower


About the author 

Florie Malapit

Contributing Writer at Sparkle and Shine Today. She is a freelance content writer with a Bachelor’s degree in Business Administration, major in Marketing Management, and more than two years of blog and content writing experience.


  • Home
  • Blog
  • Bathroom
  • How to Clean a Shower Head: Easy Steps to Eliminate Mineral Deposits